Product Description:
Daikin plunger pumps offer advantages such as high-pressure capability, low-noise design, high energy efficiency, and intelligent control. However, attention should be paid to oil cleanliness and maintenance intervals during use.
Advantages
High-pressure capability: Maximum operating pressure reaches 40 MPa, making them suitable for high-pressure hydraulic systems.
Low-noise technology: Utilizing an adjustable swash plate angle design and a V-shaped plunger structure, noise levels remain below 60 decibels across the entire pressure range.
Energy efficiency: Volumetric efficiency reaches 95%, power loss is reduced by 18%, and a smaller fuel tank configuration is supported (reducing capacity by 30%).
Intelligent control: Integrated pressure compensation, load sensing, and electro-hydraulic proportional control modes are available, with a response time of less than 50 ms.
Long-life design: Models released in 2025 utilize ceramic plunger assemblies with a service life of up to 12,000 hours.
Usage Precautions
Fluid Requirements: The oil viscosity must be maintained within the range of 10-400 mm²/s, and cleanliness must meet ISO 4406 18/16/13 standards.
Maintenance Interval: The standard maintenance interval is 5,000-8,000 hours. During installation, ensure that the oil inlet flow rate is less than 1.2 m/s.
| Displacement |
200cm³ |
| Color |
Grey |
| Valve Body Material |
Cast iron |
| Operating Temperature |
Varies depending on model |
| Media Compatibility |
Air, gas, water, oil |
| Mounting Type |
Varies depending on model |
| Port Position |
Side Port |
| Seals |
FKM |
| Fuel |
oil |
| Stroke Length |
2000 step (12.5mm) |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Your message must be between 20-3,000 characters!
