Hydraulic Connection:Sub-Plate
Seal Type:Nitrile, Viton, or Teflon
Mounting Style:Threaded
Working Pressure Min:3.5 bar
Maximum Temperature:Up to 200°C
Fluid Temperature Range:-20 ….. +80 °C
Valve Body Type:Straight-through
Actuating Control:Single Air Pilot
Flow Rating:See performance data
Body Material:Cast Iron, Stainless Steel, or Brass
Manual Override:with detent
Connection Type:NPT, BSP, or SAE
Temperature Of Media:Normal Temperature
Assernbly Position:Any position
Housing Material:Die cast zinc
Certifications:CE, ISO 9001
Operation Method:Mechanical
Leakage Rate:Less than 0.5 ml/min
Valve Hex Size:1 3/8 in.
Connection Form:Screw thread
Fluid Compatibility:Mineral-based hydraulic fluids
Flow Rating:Up to 500 l/min
Manual Override:with detent
Nominal Flow Qn:900 l/min
Locknut Torque:80 - 90 lbf in.
Media Type:Oil, Water, Gas
Electrical Connector:Connector 7-pole (6 + PE)
Sealing Principle:15 mm, Soft seal
Capacity:30 gpm
Max Operating Pressure:5000 psi
Valve Connection:Threaded, Flanged, Welded
Mounting Position:Unrestricted, Preferably Horizontal
Type Of Actuation:with pneumatic actuation
Relative Duty Factor:Continuous; ED = 100%
Type Of Actuation:Solenoid-actuated
Dimensions:5.5 x 3 x 2 inches